Texas Post Drivers & Amarekan MFG
307-754-7909 

Drive up to 4.5" Diameter Posts with this unit. With the deluxe Mount you can position the driver in the center, or mount off to the side at adjustable positions. 500 ft lbs of energy and weighing only 426 LBS this driver is a beast!  

Optional add-on: is a t-post driver - schedule 80 3" tubing 4 ft. Long w/ 1.5" thick strike plate

​

Optional add-on: standard flow or high flow USA made auger drive unit (bits additional)

​

• Energy class: 750 ft. lb.

• Post cups available in 3,5,8" flat or domed

• Weight of post driver with skid steer mount: 1,200 lbs

• Minimum skid steer lifting capacity: 1,500 lbs

• Minimum oil flow - gallons per minute (gpm): 11 gpm

• Max oil flow - gallons per minite (gpm): 27 gpm

• Minimum working pressure: 2,000+ psi

• Blow rate: 650-1,400 blows per minute (relative to idle speed)

• Chisel shaft diameter: 2.7"

• Thickness of sandwiched steel plate frame: 1.5" (thickest in the industry!)

• Comes with nitrogen charge kit

• LIFETIME WARRANTY!

• Post cups available in 3,5,8, or 9.5" flat or domed 

• Energy class: 1250 ft-lb.

• Weight of post driver with skid steer mount: 1,300 lbs

• Min. Skid steer lifting capacity: 2500 lbs.

• Minimum oil flow - gallons per minute (gpm)" 11

• Max oil flow - gallons per minute (gpm): 27 gpm

• Working pressure: 2200 psi

• Chisel shaft diameter: 3”

• Blow rate (blows per min.): 600-900

• Comes with nitrogen charge kit

• LIFETIME WARRANTY - best in industry!

Features That Set It Apart:

• Heavy-duty 3/8" construction for maximum durability in the harshest conditions

• AR400 steel 5/8" cutting edge offering superior abrasion resistance for extended life

• Schedule 80 greaseable sleeves

• 5/8" ripper tines that effortlessly break through tough soil and ground

• 2.5" x 10" USA-made cylinder 

Total Weights

72" - 897 lbs.

84" - 955 lbs. ($4265) 

The 3-blade brush cutter is an unbelievable land clearing machine. Use the XHD brush cutter to clear property line, gas lines, and building lots. The brush cutter is capable of cutting up to 6″ diameter brush. Our brush cutter features a robust (14-20) gpm American high torque motor system matched to an 100 hp rated rc100 gearbox. The gearbox increases the tip speed x 1.9 by utilizing this gear box.

​

This brush cutter is bi-directional. The blades will spin in both directions allowing you to utilize one side for cutting tall grass and the other side for Clearing up to 6" brush!

The Brush Master has a (16-26 gpm) motor upgrade for $600 (Call to order.)

​

60" weight: 1,200 lbs.  ($5995) 

72" weight: 1,350 lbs.

The PUSHER Road Grader allows you to crown roads for improved drainage.  Regular non-hydraulic and horizontal hydraulic road graders are effective for leveling ground, but certainly not for building a contour into your road. Tired of potholes and channeling on your road, the PUSHER is your answer!

The hydraulic cylinder simply raises and lowers the leading cutting edge approximately 1-6".  This allows for different levels of aggression with respect to cutting and pulling material into the center of grader for the crown.

NOW AVAILABLE In 72", 84" and 96" WIDTHS!

LIFETIME WARRANTY on CRAFTSMANSHIP!

• 4" square tubing frame - 1/4" wall

• 1/2″ plate tines! - spaced on 3" centers

• Monster 2.5" x 10" cylinders!!! built by Amarekan Mfg. in Oklahoma!!!

• 3/16" thick two-piece cylinder covers - studs welded directly to the custom cylinder barrel

• All fittings are swivel fittings to allow maximum articulation to prevent leaks after years of use and abuse

• 1.25" custom machined pins for tight tolerance and heavy wall d.o.m. greasable bushings (no slop!)

• Removable side plates for carrying large brush, pipe, etc.

• Serrated tines on bucket sides plates for holding brush in the bucket

• Serrated teeth cut into the bucket tines for gripping brush

• 5/8" cutting edge with elongated & gusseted combed tooth design

72″ weight – 1,216 lbs. !!!

78″ weight – 1,271 lbs. !!!

84″ weight – 1,370 lbs. !!!

• Electric over hydraulic valve.

• Replaceable cutting edge is available.

• Available sizes: 72", 84”, 96”.

• 1/4″ mold board.

• 3 1/2″ x 4″ cylinders.

• 1/2″ AR400 edge.

• Optional universal or 14 pin wiring harness.

• Optional 4-way dozer blade available.

• 10″ cutting capacity

• 1/4’’ deck with sides reinforced with 3/8’’ AR400

• Bent axis piston motor

• 4x bi-directional blades made with 3/4” AR400

• Requires a case drain

• Available in 72" & 78" cutting width

• 1/2″ double round blade holder

• Mulching teeth standard on all apex cutters